Roots vacuum pump
- turboyun
- zhoucun
Roots vacuum pump (hereinafter referred to as roots pump) is a variable volume vacuum pump with two blade rotors rotating synchronously in opposite directions. There is a small gap between the rotors and between the rotor and the inner wall of the pump shell.
Roots vacuum pump (hereinafter referred to as roots pump) is a variable volume vacuum pump with two blade rotors rotating synchronously in opposite directions. There is a small gap between the rotors and between the rotor and the inner wall of the pump shell.
Roots vacuum pump has been tested by long-term operation in petroleum, chemical industry, plastics, pesticides, steam turbine rotor dynamic balance, aerospace space simulation and other devices, so it should be vigorously promoted and applied in China. At the same time, it is also widely used in petroleum, chemical industry, metallurgy, textile and other industries. Vacuum pump accessories are used as vacuum pump silencers for noise control of vacuum pumps.
Roots pump is a vacuum pump without internal compression. Generally, the compression ratio is very low, so the high and medium vacuum pumps need a front stage pump. It is a vacuum pump that realizes air extraction by moving gas under the pushing action of synchronous and reverse rotation of a pair of blade rotors in the pump cavity. Roots vacuum pump refers to a mechanical vacuum pump with a pair of shoe soled rotors rotating synchronously at high speed. This pump can not pump air alone. The front stage needs to be equipped with oil seal, water ring, etc. to directly exhaust the atmosphere.
Its structure and working principle are similar to roots blower. During operation, its suction port is connected with the evacuated container or the main pump of vacuum system. There is no contact between the rotor and the rotor and between the rotor and the pump shell, and the clearance is generally 0.1 ~ 0.8 mm; Oil lubrication is not required. Rotor profiles include circular arc, involute and cycloid. Involute rotor pump has high volume utilization rate and easy to ensure machining accuracy, so the involute rotor profile is mostly used. The rotating speed of Roots vacuum pump can be as high as 3450 ~ 4100 rpm; The pumping rate is 30 ~ 10000 L / S (1 L = 10-3 m3); limit vacuum: 6.5 for single stage × 102 PA, double stage 1 × 103 PA.